Place all of the soaker pieces on the fold of the fabric, making sure the stretch of the fabric is going from left to right (hip to hip). You also want the leg cuffs and waistband to have the stretch going from left to right (along the longest side). For fleece, the stretch should go in the opposite direction of the bold lines on the pattern. If you are using knit wool, the knit (Vs in the knit) should go in the direction of the bold lines.
On the new pattern for fleece soakers, the arrowed lines should go in the direction of the stretch of the fleece.
Here's a good video tutorial by Sew Cheeky that also includes adding the skirtie.
Cut out all four soaker pieces. If you desire a slimmer/wider waistband or leg cuffs, make the necessary adjustments to the rectangles you cut for those pieces.
Putting right sides together (when there is a right side to the fabric), sew the sides of the soaker body together. Putting right sides together, sew short ends of the waistband and the leg cuffs to form bands. If the material you are using has a tendency to unravel, use a zig zag stitch on the raw edges.
Fold down the waistband and leg cuffs with wrong sides together so that the raw edges of the seam are hidden. Turn the soaker body right side out.
Put the soaker body inside the waistband with all raw edges together. Sew the waistband to the soaker body. I try to center the seam in the waistband in the back of the soaker. Use a zig zag stitch on the raw edges as needed. If you don't like to stretch your waistband so much, you can also turn your soaker inside out and put the waistband on the inside with raw edges together to sew it. I will be adding pictures of this procedure.
Place the leg cuffs on the soaker body in the same manner as the waistband with raw edges together. Sew the leg cuffs to the soaker body. Use a zig zag stitch on the raw edges as needed.
Admire your handywork!
Inside of the soaker
Rita's Rump Cover
9 years ago